Innivative Graphic Solution
  • Home
  • Press and Converting
  • Tooling
  • Integration
  • Services
  • Contact
  • Gallus machine
  • Prati
  • REBORN
  • Wink
  • zecher
  • macdermid
  • rks
  • 3m
  • lamptech
  • recyl
  • pulse
  • von arx
  • Nikka
  • Martin
  • Pantec
  • Heaford
  • uv ray
  • hoca
  • kelva
  • Laser Clean Anilox
  • IGS SERVICE
  • Screeny Rotary
Recommend Print

SMARTGAP® ADVANCE

    SMARTGAP® ADVANCE Image 1

SMARTGAP® ADVANCE

As the basic model in the SmartGap® range, the ADVANCE already meets the highest demands in the production of labels and other narrow web products. Thanks to its unique stability, you can easily achieve perfect die-cutting results even at high speeds. To further increase efficiency, you can easily upgrade the Advance to the digital versions TOUCH and AUTOCONTROL.

THE SOLID BASIS FOR YOUR DIE-CUTTING SUCCESS

The gap between the magnetic cylinder and the anvil cylinder, also known as “clearance“ or “undercut“, is of particular importance during die-cutting. In combina-tion with the thickness and composition of the liner material, the gap dimension determines the opti-mum height of the flexible die.Changes in the gap size (e.g. due to wear or heating) have a negative effect on the cutting result. More-over, there are further challenges in die-cutting: tool tolerances, fluctuating liner gauges and ever thinner liners. With the adjustable SmartGap® system, you have the cutting process under control at all times. A high-precision eccentric mechanism quickly and precisely regulates the gap (and therefore the cutting depth).

EASY HANDLING - MAXIMUM PRECISION

Using two rotary knobs on the unit frame, you can individu-ally adjust the gap on both sides to compensate for one-sided wear, inaccuracies in the cutting tool and fluctuations in material thickness.If the knob is turned in the “GAP +“ direction, the gap size is reduced and thus the cutting becomes deeper. Turning the knob in the “GAP -“ direction reduces the cutting depth by increasing the distance between the cylinders. Adjustment is possible both at standstill and while the machine is running. The adjustment steps are only half a micron, so that even the smallest corrections can be made.

Press & Converting
  • Gallus
  • Prati
  • Reborn
  • UV ray
Address
  • 59/46-47 Moo 12. Petkaem 120 Alley Phetkasem Rd. Omnoi Kratumban Samutsakorn Thailand 74130
  • Tel : +66 2489 7115 Fax : +66 2489 7113 Email : sales@igs.co.th